Recycled Parts Moderator Newsgroup, Discussion Board and Trading Place > Curbside Centers
> Paper
> Hobart airforce 400 plasma cutter 500474
Hobart airforce 400 plasma cutter 500474
YOUR SOURCE FOR WELDING SUPPLIES
WELDING EQUIPMENT - SAFETY SUPPLIES
ARCAIR SLICE PACKS - LENCO SPOT
The AirForceâ„¢ 400 is an economical plasma cutting system for work on all conductive metals including mild steel up to 3/8 in (9.5 mm), aluminum to 1/4 in (6.4 mm), and stainless steel to 5/16 in (8 mm) while drag cutting. Rated cut of 3/8 in (steel) at 10 in. per minute. Can sever cut 5/8 in with new consumables and proper technique. Solid-state design and Hobart's reliable technology packs a lot of performance into a very portable, 49 lb (22 kg) package.
* ICE-27C hand-held torch with 20 ft (6 m)
* 20 ft (6.1 m) heavy-duty work clamp
* Extra consumables (3 electrodes, 3 tips and 1 air fitting)
* 10 ft (3 m) power cord with 115 VAC, 20 A plug
* Easy-to-connect, built-in gas/air filter and regulator with extra protection
* Pilot Arc Controller increases cutting capabilities and speeds, and improves tip life
* ICE-27C torch with increased comfort, safety trigger and improved swirl ring and cup
* LVCâ„¢ line voltage compensation
* LED indicators for pressure, power and cup
* Starts without high frequency
* Convenient consumables storage compartment
* Internal gas/air filter/regulator for added protection
* Postflow cooling circuit extends consumable life
* ICE-27C Hand-Held Torch #200 882 20 ft (6 m)
* Plasma Cutting GuidePlasma Cutting Guide #195 981 Cut straight lines or circles up to 12 in diameter with ease.
* Cutting Guide Suction/Magnetic Base with Extension Arm #195 979 Add this to your cutting guide for convenient attachment to all flat surfaces. The extended arm accommodates holes up to 30 in diameter.
* Standoff Roller GuideStandoff Roller Guide #194 883 Helps maintain recommended standoff distance when using extended consumables.
* #30A Running Gear#30A Economy Running Gear and Cord Wrap #195 093 Economical running gear with angle for easy front panel access and storage for gloves and tools.
Rated Output at 35% Duty Cycle
Amps Input at Rated Output, 60 Hz
4.5 CFM (129 L/min) at 60 PSI (414 kPA)
_________________________________________________________________________________________________
B & R WELDER REPAIR SERVICE INC.
4412 SOUTHERN BUSINESS PARK DRIVE
Hours : Mon-Fri 8-5 Sat 9-12 EST
Email questions to : ****@radix.net
we only accept wire transfers. Please call for our banking info.
Personal checks take 2 weeks to clear
